Equipment

EQUIPMENT ONSITE

ENGINEERING EQUIPMENT QUALITY ASSURANCE EQUIPMENT CNC EQUIPMENT
BORING MILLS MILLING MACHINES LATHES SURFACE GRINDERS DRILLING EQUIPMENT SAWS MATERIAL HANDLING EQUIPMENT PRESSES MISCELLANEOUS EQUIPMENT

CNC EQUIPMENT...........................................................................................................
1 - Fanuc Robocut-1B Wire EDM Machine
'X'= 17.75" , 'Y'= 11.8" , 'Z'= 11.8"

1 - Fanuc Robocut a - 1iA Wire EDM Machine
'X'= 20.4” , 'Y'= 14.5" , 'Z'= 16.1"

1 - Sodick # EPOC-800 Wire EDM Machine
'X'= 40" , 'Y'= 24" , 'Z'= 12"

1 - CNC Komatsu Cybermation Rasor ( Fine Plasma )
2 Axis - 'X'= 96" , 'Y'= 48"
Cutting Capacity - 3/8" Steel.

1 - Sharnoa CNC Vertical Machining Centre, with Laser digitizing capabilities
'X'= 35" , 'Y'= 20.5" , 'Z'= 22"

1 - Sharnoa CNC Vertical Machining Centre, with Laser digitizing capabilities
'X'= 80" , 'Y'= 36" , 'Z'= 28"

1 - Sharnoa CNC Vertical Machining Centre, with Laser digitizing capabilities & 8000 RPM spindle.
'X'= 65" , 'Y'= 34" , 'Z'= 28"

1 - SuperMax CNC Vertical Machining Centre, with 4000 RPM at spindle.
'X'= 82" , 'Y'= 34" , 'Z'= 30"

2 - Y.C.I. CNC Vertical Drilling Centres.
'X'= 40" , 'Y'= 20.4" , 'Z'= 21.2"

2 - Y.C.I. CNC Vertical Drilling Centres.
'X'= 22" , 'Y'= 16.1" , 'Z'= 17.7"

1 - Bergonzi CNC Radial Drill.
'X'= 40" , 'Y'= 59" , 'Z'= 15.75"

1 - Bergonzi CNC Radial Drill.
'X'= 67" , 'Y'= 79" , 'Z'= 17.75"

Back to Top

BORING MILLS.........................................................................................................

1 - Dominion T130 CNC Horizontal Boring Mill, with 5.1” spindle & 3150 RPM.
'X'= 157.5" , 'Y'= 100" , 'Z'= 49.25", ‘W’= 28”, ‘B’= 360°

1 - Toshiba Horizontal Boring Mill, 5-1/8" spindle.
Top of table to centre of spindle, 60".
Left to Right, point to point, 98.4".
Table, 47" x 94".
Maximum workpiece weight, 22,000 lbs.

1 - Tos Horizontal Boring Mill, 4" spindle.
Rotary Table, 60" x 60"
Travel - Left to Right, 78"
Vertical, 60"

Back to Top

MILLING MACHINES.................................................................................................

1 - Supermax Vertical Mill 44" x 11"

1 - Supermax Horizontal Mill 44" x 11"

1 - Heckert Universal Mill 60" x 12"

1 - EX-CELL-O Vertical Mill 48" x 12" Power Feed

5 - EX-CELL-O Vertical Mills 42" x 8" with readouts

2 - Bridgeport Vertical Mills 42" x 8" with readouts

2 - Tos Vertical Mills 42" x 10" with readouts

4 - Darbert Vertical Mills 42" x 8" with readouts

2 - Cincinnati Vertical Mills 42" x 12"

1 - Induma Universal Mill 60" x 12"

1 - TOS Vertical Mill 60" x 12"

Back to Top

LATHES....................................................................................................................

1 - Lacfer Precision Turning and Screw Cutting lathe,
10" centre height

1 - Tos Trencin SUI 50 Precision Turning and Screw Cutting lathe,
11" centre height

Back to Top

SURFACE GRINDERS................................................................................................

1 - Brown & Sharpe 12" x 24"

1 - Brown & Sharpe 10" x 30"

1 - Brown & Sharpe 6" x 18"

1 - Brown & Sharpe 5" x 10"

4 - Brown & Sharpe 6" x 12"

1 - Thompson 10" x 40"

1 - Danobat 26" x 63"

Back to Top

DRILLING EQUIPMENT..............................................................................................

2 - Mas Radial Drill 13 ft. arm, 4" capacity

1 - Mas Radial Drill 8 ft. arm, 2-1/2" capacity

1 - Torino Radial Drill 6 ft. arm, 4" capacity

1 - EMA Radial Drill 4 ft. arm, 1-3/4" capacity

1 - EMA Radial Drill 4 ft. arm, 1-1/2" capacity

1 - Bergonzi Radial Drill 4 ft. arm, 1-3/4" capacity

1 - Grimston Drill Press 1-1/2" capacity, rotating table

1 - Arboga Vertical Drill Press 1-1/2" capacity

1 - IMA Pedestal Drill Press 1-1/2" capacity

Back to Top

SAWS...................................................................................................................

1 - Do-All Model 2012-2A, with Air Table

1 - Do-All Model 36-2 ( 3 wheel )

1 - Grob Model 4V-18, with Power Table

1 - K & K Roll-A-Way vertical cut-off band saw

1 - Verticut Roll-In vertical cut-off band saw

2 - Marvel Universal band saw, 20" x 20" capacity

1 - KBC 16" cut-off saw

Back to Top

MATERIAL HANDLING EQUIPMENT.........................................................................

1 - 50 ton overhead crane

2 - 30 ton overhead cranes

1 - 25 ton overhead crane

2 - 22 ton over head cranes

2 - 10 ton overhead cranes

2 - 5-1/2 ton overhead cranes

4 - 2-1/2 ton overhead cranes

1 - 1/2 ton boom crane

1 - 1 ton boom crane

1 - Schreck hydraulic die truck
20,000 lbs. capacity

1 - 10,000 lb. capacity Fork Lift truck

1 - 6,000 lb. capacity Fork Lift truck

1 - 2,000 lb. capacity Mobile Lift

1 - 2,000 lb. capacity Clark high lift

Back to Top

PRESSES.................................................................................................................

1 - 1000 ton, Danly straight side, mechanical
Bed, 96" x 144"
Shut Ht., 60"

1 - 600 ton, Clearing straight side, mechanical
Bed, 72" x 120"
Shut Ht., 31"

1 - 500 ton, Clearing straight side, mechanical
Bed, 72” x 96”
Shut Ht., 50”

1 - 500 ton, Bliss straight side, mechanical
Bed, 72” x 96”
Shut Ht., 50”

1 - 300 ton, Bliss straight side, mechanical
Bed, 42" x 72"
Shut Ht., 24"

1 - 300 ton, Toledo straight side, mechanical
Bed, 38" x 72"
Shut Ht., 20"

1 - 300 ton, Niagara straight side, mechanical
Bed, 48" x 96"
Shut Ht., 37"

1 - 300 ton, Niagara straight side, mechanical
Bed, 60" x 120"
Shut Ht., 48"

1 - 200 ton, Bliss straight side, mechanical
Bed, 48" x 72"
Shut Ht., 37"

Back to Top

ENGINEERING FACILITIES.................................................................................................................

DIE DESIGN HARDWARE/SOFTWARE

6 - Workstations using Pro/Engineer 2001 3D Solids Design Software.

2 - Workstations using DynaForm & FastBlank, Version 5, forming and
blank unfold, simulation Software.

1 - Hewlett Packard Design Jet 5500 Ink Jet Plotter. (42" capacity)

1 - Hewlett Packard Design Jet 750C plus Ink Jet Plotter.

CNC PROGRAMMING HARDWARE/SOFTWARE

5 - Workstations using Pro/Engineer 2001 Machining Software.

1 - Workstation using Delcam Duct and PowerShape Software.

2 - CAD/CAM Workstations using Mastercam Version 7.1 Wire EDM
Software.

2 - CAD/CAM Workstations using Mastercam Version 8.1 Mill Software.

2 - CAD/CAM Workstations using Sharnoa CNC and Laser Simulation
Software to test programs before being cut.

All Engineering computers are networked together via Microsoft Server2000.
CAD/CAM Workstations are networked with the CNC machines on shop floor

MISCELLANEOUS EQUIPMENT.................................................................................

1 - Glass Bead blasting machine, 42" x 24" capacity

1 - Glass Bead blasting machine, 36" x 24" capacity

2 - Granite Inspection plates, 12" x 48" x 72"

1 - Mitutoyo 14" projector, magnification, surface illuminator and digital read out

1 - Sunnen honing machine

1 - Alexander tool and cutter grinder

1 - Grob drill point grinder, 3" capacity

4 - Pedestal grinders

1 - Delta belt and disc grinder

1 - Sullair 60 H.P. compressor

1 - Sullair 40 H.P. compressor

1 - Sullair air dryer

1 - Oliver Filing machine

1 - Canox Arc welder

1 - Wysong Power Squaring Shear
1/8" x 8' capacity

1 - Wysong, 90 ton Press Brake
1/8" x 8' capacity

Back to Top

QUALITY ASSURANCE EQUIPMENT.................................................................................

1 - Mitutoyo B-321 Co-ordinate Measuring Machine, 62 x 102

1 - Starrett Rapid Check, Model # RCS-2828-18
Co-ordinate Measurement Machine.

1 - Steinbichler, White Light Scanning System, using Polyworks and Geo-Magic software, to produce scanned surface data for reverse engineering and component inspection.

1 - Buehler Rockwell Hardness Tester.

1 - PC using CheckMate Inspection, Reporting & Analysis software.

1 - PC using QCPRO software for SPC analysis.

1 - Maxum Digital Electronic Indicator for variable data collection.